100 Holes Capsule Filling Machine

To use the 100 Holes Capsule Filling Machine, start by loading empty capsules onto the loading tray and placing the tray onto the machine. Make sure the front knob is turned to the right. Pull the locking lever forward and push down the long handle, which will lift the caps off the capsule bodies. Set aside the tray with the caps. Push the locking lever back so the capsule bodies drop down and become level with the filling surface. Place the powder tray on the filler to prevent spilling. Pour and spread the pre-measured powder, move any extra powder onto the shelf of the powder tray, lower the tamper, and lock it in place. Turn the handle to compress the powder so more fits into each capsule.

Next, raise the tamper and spread the extra powder from the shelf into the capsules for uniform filling. Return the tray with the caps to the filler. Turn the front knob to the left and lower the locking plate, then engage the lock. Hold the tamper handle and push down the long handle, which pushes the capsule bodies up into the caps, locking them in one step. Disengage the lock for the locking plate, lift the locking plate, and turn the front knob to the right. Push down the long handle and remove the tray of completed capsules. The capsules are now filled and can be released by turning the tray.